What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 00:02

but this device (an Inductor) … impedes the rapid changes in the current.
What is lightning?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
Why is Donald Trump criticized by so many people?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
[old diagram got deleted by accident]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
How can someone effectively handle a targeted individual?
2024–10–14 [Omar Gharbi Omar Gharbi ]
It also is a device that limits the change in current flow.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Why should you never do drugs? Will this story absolutely shock you?
a photo is worth a thousand words.
These are simplified answers to the original question, and does not change anything I wrote above.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Why am I sweating so much at night even though my room is really cold?
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
(Dc diagram shown, AC is similar).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
but I think this circuit , shows a few more pieces.
States With the Most Generous Tippers - Newser
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, what happens?
nine
Here is a simplified AC power diagram.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This device then solves the entire problem.
What are some creepy bestiality-promoting questions obviously asked for sexual gratification?
Upvotes:
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Why do Indian parents force their kids to do stuff?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.
One
What does a fuse do?
What is the best/cute/funny/playful chat/conversation between brother and sister?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–16 [ OO OLAOYE OYEBODE ]
But… the neutral is now “floating” because of the 1 ohm resistance.
One is “what exactly is in a ‘surge protector’ ? ”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Now when you have a certain ac resistance, then a current flows in a loop.
The third is lightning and “how it gets conducted into a home.”
He then asserts :
There are three different concepts here that are getting confused.
[image of Common-mode choke]
He then describes the function of a fuse.
An AC voltage/ current source, and an ac inductive load.
These devices are installed between the “hot” and “neutral” and protective ground.
This is where the MOV conducts again, and dissipated the energy.
First Sentence:
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Barnstars:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
A circuit breaker is similar, but is resettable.
2024–10–10[John johnson John Johnson ]
A fuse is a non-resetable over current circuit protector.
There are two important concepts here.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
He then describes Rainy Season and Lightning.
This is 'the assistant's answer'
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
The other is “what does a “fuse” do?”
what exactly is a ‘surge’ protector?
eight
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
the problem then depends on "how fast does the fuse operate?".
This one hit behind the barn.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At one ohm, the resistor has a maximum of 1 watt power.
The bolt then partially travels down the line to your home.
It seems Mohan does not understand the difference between a comment and an Answer.
But it can get overloaded, and no longer works.
At least they know the answer if they wanted it.
In schematic diagrams this is the symbol for a fuse:
This is where this question deviates from being a 'generic' question, and becomes more specific.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Edit 2024–10.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.